Roof Leaks and Gutter Repairs
Nexgen Plumbing NQ fixes roof leaks and looks after roof plumbing across Townsville: metal roofs, flashings, valleys, gutters, downpipes and gutter guard. We test for the leak, then make good the screws, seals and flashing so it stays dry.
Screws work loose and rust, seals perish, flashings lift and gutters fill with leaves. It usually shows up in the first heavy storm of the wet, as water through the ceiling, so get it checked before November.
Unbelievable. A work group that follows though with out drama. Great work, found some smaller areas that needed attention / cleaned up the work area. Hopefully another 30years of life in my roof. I have no hesitation in recommending.

Find Where the Roof Is Leaking
Where the stain or drip shows on the ceiling usually tells you where the water is getting in.
- Cause
- Usually the gutter overflowing at the back, against the fascia, so the water runs into the eaves and down inside the wall. Blocked, rusted or undersized gutters, or a blocked downpipe.
- Fix
- Gutters cleaned, repaired or replaced, downpipes cleared, and leaf guard where trees are dropping into them.
- Cause
- The valley. Leaves pile up in it, or it rusts through, and in a downpour the water spills over its edges under the roof sheets.
- Fix
- The valley cleared, resealed or replaced.
- Cause
- Where a pipe or vent comes through the roof. The flashing or seal around it has cracked or lifted.
- Fix
- The flashing replaced or the penetration resealed.
- Cause
- Loose, rusted or missing roof screws, or perished washers under them, letting water in at each screw hole.
- Fix
- The roof re-screwed with new screws and seals.
- Cause
- The flashing along the join has come loose or rusted, so water runs behind it.
- Fix
- The wall flashing made good or replaced.

Roof, Gutter and Downpipe Work
- Roof leaks
- Tested and found, then screws, seals and flashing made good to keep the water out.
- Re-screwing metal roofs
- Loose, rusted or missing screws replaced, with new seals at every hole.
- Flashings and penetrations
- Flashings along walls replaced, and vents, flues and pipes through the roof resealed.
- Gutters
- Cleaned, repaired or replaced before they overflow into the eaves.
- Downpipes
- Cleared, replaced or added, and connected into the stormwater.
- Gutter guard
- Fitted where trees keep filling the gutters.
Roof Plumbing Townsville FAQs
What does a roof plumber do?
Everything on the roof that carries water: the roof sheets and their screws, flashings around walls and penetrations, valleys, gutters and downpipes. A roof plumber finds and fixes roof leaks and keeps the water heading for the stormwater.
How do you find a roof leak?
By testing the roof for the leak instead of guessing from the stain on the ceiling. Water often travels along a sheet or batten before it drips, so the repair has to go where it actually gets in.
How do I know my gutters need replacing?
Rust holes, joints that drip, sections that sag or pull away from the fascia, and gutters that overflow at the back even when they’re clean. If they’re rusted through, replacing them beats patching.
Should I re-screw my roof or replace it?
If the sheets are sound and the leaks are at the screws, re-screwing with new screws and seals often gives the roof plenty more life. If the sheets themselves are rusted through, it’s time to look at replacing them.
When should I get the roof and gutters checked?
Before the wet season, which runs from about November to April. That’s when a blocked gutter or a lifted flashing shows itself, usually in the middle of the first big storm.
Book a Roof and Gutter Check Before the Wet
Roof leaks, re-screwing, gutters, downpipes and gutter guard across Townsville. If it’s leaking now, put a bucket under it and call Justin.